Add Dunst configuration files. Add mc configuration files. Add mpv configuration files. Add neofetch configuration files. Add Neovim configuration files. Add Sway configuration files. Add Waybar configuration files.

pull/1/head
inference 9 months ago
parent c4c3c356a4
commit bfbd50b7db

@ -0,0 +1,471 @@
# Dunst configuration file.
# Copyright 2021 Inference
# 1.0.0.1
[global]
### Display ###
# Which monitor should the notifications be displayed on.
monitor = 0
# Display notification on focused monitor. Possible modes are:
# mouse: follow mouse pointer
# keyboard: follow window with keyboard focus
# none: don't follow anything
#
# "keyboard" needs a window manager that exports the
# _NET_ACTIVE_WINDOW property.
# This should be the case for almost all modern window managers.
#
# If this option is set to mouse or keyboard, the monitor option
# will be ignored.
follow = mouse
# The geometry of the window:
# [{width}]x{height}[+/-{x}+/-{y}]
# The geometry of the message window.
# The height is measured in number of notifications everything else
# in pixels. If the width is omitted but the height is given
# ("-geometry x2"), the message window expands over the whole screen
# (dmenu-like). If width is 0, the window expands to the longest
# message displayed. A positive x is measured from the left, a
# negative from the right side of the screen. Y is measured from
# the top and down respectively.
# The width can be negative. In this case the actual width is the
# screen width minus the width defined in within the geometry option.
geometry = "400x0-0+47"
# Turn on the progess bar
progress_bar = true
# Set the progress bar height. This includes the frame, so make sure
# it's at least twice as big as the frame width.
progress_bar_height = 10
# Set the frame width of the progress bar
progress_bar_frame_width = 1
# Set the minimum width for the progress bar
progress_bar_min_width = 150
# Set the maximum width for the progress bar
progress_bar_max_width = 300
# Show how many messages are currently hidden (because of geometry).
indicate_hidden = yes
# Shrink window if it's smaller than the width. Will be ignored if
# width is 0.
shrink = no
# The transparency of the window. Range: [0; 100].
# This option will only work if a compositing window manager is
# present (e.g. xcompmgr, compiz, etc.).
transparency = 0
# The height of the entire notification. If the height is smaller
# than the font height and padding combined, it will be raised
# to the font height and padding.
notification_height = 0
# Draw a line of "separator_height" pixel height between two
# notifications.
# Set to 0 to disable.
separator_height = 5
# Padding between text and separator.
padding = 8
# Horizontal padding.
horizontal_padding = 8
# Padding between text and icon.
text_icon_padding = 0
# Defines width in pixels of frame around the notification window.
# Set to 0 to disable.
frame_width = 3
# Defines color of the frame around the notification window.
frame_color = "#aaaaaa"
# Define a color for the separator.
# possible values are:
# * auto: dunst tries to find a color fitting to the background;
# * foreground: use the same color as the foreground;
# * frame: use the same color as the frame;
# * anything else will be interpreted as a X color.
separator_color = frame
# Sort messages by urgency.
sort = yes
# Don't remove messages, if the user is idle (no mouse or keyboard input)
# for longer than idle_threshold seconds.
# Set to 0 to disable.
# A client can set the 'transient' hint to bypass this. See the rules
# section for how to disable this if necessary
idle_threshold = 120
### Text ###
font = Monospace 12
# The spacing between lines. If the height is smaller than the
# font height, it will get raised to the font height.
line_height = 0
# Possible values are:
# full: Allow a small subset of html markup in notifications:
# <b>bold</b>
# <i>italic</i>
# <s>strikethrough</s>
# <u>underline</u>
#
# For a complete reference see
# <https://developer.gnome.org/pango/stable/pango-Markup.html>.
#
# strip: This setting is provided for compatibility with some broken
# clients that send markup even though it's not enabled on the
# server. Dunst will try to strip the markup but the parsing is
# simplistic so using this option outside of matching rules for
# specific applications *IS GREATLY DISCOURAGED*.
#
# no: Disable markup parsing, incoming notifications will be treated as
# plain text. Dunst will not advertise that it has the body-markup
# capability if this is set as a global setting.
#
# It's important to note that markup inside the format option will be parsed
# regardless of what this is set to.
markup = full
# The format of the message. Possible variables are:
# %a appname
# %s summary
# %b body
# %i iconname (including its path)
# %I iconname (without its path)
# %p progress value if set ([ 0%] to [100%]) or nothing
# %n progress value if set without any extra characters
# %% Literal %
# Markup is allowed
format = "<b>%s</b>\n%b"
# Alignment of message text.
# Possible values are "left", "center" and "right".
alignment = left
# Vertical alignment of message text and icon.
# Possible values are "top", "center" and "bottom".
vertical_alignment = center
# Show age of message if message is older than show_age_threshold
# seconds.
# Set to -1 to disable.
show_age_threshold = 60
# Split notifications into multiple lines if they don't fit into
# geometry.
word_wrap = yes
# When word_wrap is set to no, specify where to make an ellipsis in long lines.
# Possible values are "start", "middle" and "end".
ellipsize = middle
# Ignore newlines '\n' in notifications.
ignore_newline = no
# Stack together notifications with the same content
stack_duplicates = true
# Hide the count of stacked notifications with the same content
hide_duplicate_count = false
# Display indicators for URLs (U) and actions (A).
show_indicators = yes
### Icons ###
# Align icons left/right/off
icon_position = left
# Scale small icons up to this size, set to 0 to disable. Helpful
# for e.g. small files or high-dpi screens. In case of conflict,
# max_icon_size takes precedence over this.
min_icon_size = 0
# Scale larger icons down to this size, set to 0 to disable
max_icon_size = 32
# Paths to default icons.
icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
### History ###
# Should a notification popped up from history be sticky or timeout
# as if it would normally do.
sticky_history = yes
# Maximum amount of notifications kept in history
history_length = 20
### Misc/Advanced ###
# dmenu path.
dmenu = /usr/bin/dmenu -p dunst:
# Browser for opening urls in context menu.
browser = /usr/bin/firefox -new-tab
# Always run rule-defined scripts, even if the notification is suppressed
always_run_script = true
# Define the title of the windows spawned by dunst
title = Dunst
# Define the class of the windows spawned by dunst
class = Dunst
# Print a notification on startup.
# This is mainly for error detection, since dbus (re-)starts dunst
# automatically after a crash.
startup_notification = false
# Manage dunst's desire for talking
# Can be one of the following values:
# crit: Critical features. Dunst aborts
# warn: Only non-fatal warnings
# mesg: Important Messages
# info: all unimportant stuff
# debug: all less than unimportant stuff
verbosity = mesg
# Define the corner radius of the notification window
# in pixel size. If the radius is 0, you have no rounded
# corners.
# The radius will be automatically lowered if it exceeds half of the
# notification height to avoid clipping text and/or icons.
corner_radius = 0
# Ignore the dbus closeNotification message.
# Useful to enforce the timeout set by dunst configuration. Without this
# parameter, an application may close the notification sent before the
# user defined timeout.
ignore_dbusclose = false
### Wayland ###
# These settings are Wayland-specific. They have no effect when using X11
# Uncomment this if you want to let notications appear under fullscreen
# applications (default: overlay)
# layer = top
# Set this to true to use X11 output on Wayland.
force_xwayland = false
### Legacy
# Use the Xinerama extension instead of RandR for multi-monitor support.
# This setting is provided for compatibility with older nVidia drivers that
# do not support RandR and using it on systems that support RandR is highly
# discouraged.
#
# By enabling this setting dunst will not be able to detect when a monitor
# is connected or disconnected which might break follow mode if the screen
# layout changes.
force_xinerama = false
### mouse
# Defines list of actions for each mouse event
# Possible values are:
# * none: Don't do anything.
# * do_action: If the notification has exactly one action, or one is marked as default,
# invoke it. If there are multiple and no default, open the context menu.
# * close_current: Close current notification.
# * close_all: Close all notifications.
# These values can be strung together for each mouse event, and
# will be executed in sequence.
mouse_left_click = close_current
mouse_middle_click = do_action, close_current
mouse_right_click = close_all
# Experimental features that may or may not work correctly. Do not expect them
# to have a consistent behaviour across releases.
[experimental]
# Calculate the dpi to use on a per-monitor basis.
# If this setting is enabled the Xft.dpi value will be ignored and instead
# dunst will attempt to calculate an appropriate dpi value for each monitor
# using the resolution and physical size. This might be useful in setups
# where there are multiple screens with very different dpi values.
per_monitor_dpi = false
# The internal keyboard shortcut support in dunst is now considered deprecated
# and should be replaced by dunstctl calls. You can use the configuration of your
# WM or DE to bind these to shortcuts of your choice.
# Check the dunstctl manual page for more info.
[shortcuts]
# Shortcuts are specified as [modifier+][modifier+]...key
# Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
# "mod3" and "mod4" (windows-key).
# Xev might be helpful to find names for keys.
# Close notification. Equivalent dunstctl command:
# dunstctl close
# close = ctrl+space
# Close all notifications. Equivalent dunstctl command:
# dunstctl close-all
# close_all = ctrl+shift+space
# Redisplay last message(s). Equivalent dunstctl command:
# dunstctl history-pop
# history = ctrl+grave
# Context menu. Equivalent dunstctl command:
# dunstctl context
# context = ctrl+shift+period
[urgency_low]
# IMPORTANT: colors have to be defined in quotation marks.
# Otherwise the "#" and following would be interpreted as a comment.
background = "#222222"
foreground = "#888888"
timeout = 10
# Icon for notifications with low urgency, uncomment to enable
#icon = /path/to/icon
[urgency_normal]
background = "#285577"
foreground = "#ffffff"
timeout = 10
# Icon for notifications with normal urgency, uncomment to enable
#icon = /path/to/icon
[urgency_critical]
background = "#900000"
foreground = "#ffffff"
frame_color = "#ff0000"
timeout = 0
# Icon for notifications with critical urgency, uncomment to enable
#icon = /path/to/icon
# Every section that isn't one of the above is interpreted as a rules to
# override settings for certain messages.
#
# Messages can be matched by
# appname (discouraged, see desktop_entry)
# body
# category
# desktop_entry
# icon
# match_transient
# msg_urgency
# stack_tag
# summary
#
# and you can override the
# background
# foreground
# format
# frame_color
# fullscreen
# new_icon
# set_stack_tag
# set_transient
# timeout
# urgency
#
# Shell-like globbing will get expanded.
#
# Instead of the appname filter, it's recommended to use the desktop_entry filter.
# GLib based applications export their desktop-entry name. In comparison to the appname,
# the desktop-entry won't get localized.
#
# SCRIPTING
# You can specify a script that gets run when the rule matches by
# setting the "script" option.
# The script will be called as follows:
# script appname summary body icon urgency
# where urgency can be "LOW", "NORMAL" or "CRITICAL".
#
# NOTE: if you don't want a notification to be displayed, set the format
# to "".
# NOTE: It might be helpful to run dunst -print in a terminal in order
# to find fitting options for rules.
# Disable the transient hint so that idle_threshold cannot be bypassed from the
# client
#[transient_disable]
# match_transient = yes
# set_transient = no
#
# Make the handling of transient notifications more strict by making them not
# be placed in history.
#[transient_history_ignore]
# match_transient = yes
# history_ignore = yes
# fullscreen values
# show: show the notifications, regardless if there is a fullscreen window opened
# delay: displays the new notification, if there is no fullscreen window active
# If the notification is already drawn, it won't get undrawn.
# pushback: same as delay, but when switching into fullscreen, the notification will get
# withdrawn from screen again and will get delayed like a new notification
#[fullscreen_delay_everything]
# fullscreen = delay
#[fullscreen_show_critical]
# msg_urgency = critical
# fullscreen = show
#[espeak]
# summary = "*"
# script = dunst_espeak.sh
#[script-test]
# summary = "*script*"
# script = dunst_test.sh
#[ignore]
# # This notification will not be displayed
# summary = "foobar"
# format = ""
#[history-ignore]
# # This notification will not be saved in history
# summary = "foobar"
# history_ignore = yes
#[skip-display]
# # This notification will not be displayed, but will be included in the history
# summary = "foobar"
# skip_display = yes
#[signed_on]
# appname = Pidgin
# summary = "*signed on*"
# urgency = low
#
#[signed_off]
# appname = Pidgin
# summary = *signed off*
# urgency = low
#
#[says]
# appname = Pidgin
# summary = *says*
# urgency = critical
#
#[twitter]
# appname = Pidgin
# summary = *twitter.com*
# urgency = normal
#
#[stack-volumes]
# appname = "some_volume_notifiers"
# set_stack_tag = "volume"

150
mc/ini

@ -0,0 +1,150 @@
[Midnight-Commander]
verbose=true
shell_patterns=true
auto_save_setup=true
preallocate_space=false
auto_menu=false
use_internal_view=true
use_internal_edit=false
clear_before_exec=true
confirm_delete=true
confirm_overwrite=true
confirm_execute=false
confirm_history_cleanup=true
confirm_exit=false
confirm_directory_hotlist_delete=false
confirm_view_dir=false
safe_delete=false
safe_overwrite=false
use_8th_bit_as_meta=false
mouse_move_pages_viewer=true
mouse_close_dialog=false
fast_refresh=false
drop_menus=false
wrap_mode=true
old_esc_mode=true
cd_symlinks=true
show_all_if_ambiguous=false
use_file_to_guess_type=true
alternate_plus_minus=false
only_leading_plus_minus=true
show_output_starts_shell=false
xtree_mode=false
file_op_compute_totals=true
classic_progressbar=true
use_netrc=true
ftpfs_always_use_proxy=false
ftpfs_use_passive_connections=true
ftpfs_use_passive_connections_over_proxy=false
ftpfs_use_unix_list_options=true
ftpfs_first_cd_then_ls=true
ignore_ftp_chattr_errors=true
editor_fill_tabs_with_spaces=false
editor_return_does_auto_indent=false
editor_backspace_through_tabs=false
editor_fake_half_tabs=true
editor_option_save_position=true
editor_option_auto_para_formatting=false
editor_option_typewriter_wrap=false
editor_edit_confirm_save=true
editor_syntax_highlighting=true
editor_persistent_selections=true
editor_drop_selection_on_copy=true
editor_cursor_beyond_eol=false
editor_cursor_after_inserted_block=false
editor_visible_tabs=true
editor_visible_spaces=true
editor_line_state=false
editor_simple_statusbar=false
editor_check_new_line=false
editor_show_right_margin=false
editor_group_undo=true
editor_state_full_filename=true
editor_ask_filename_before_edit=false
nice_rotating_dash=true
mcview_remember_file_position=false
auto_fill_mkdir_name=true
copymove_persistent_attr=true
pause_after_run=1
mouse_repeat_rate=100
double_click_speed=250
old_esc_mode_timeout=1000000
max_dirt_limit=10
num_history_items_recorded=60
vfs_timeout=60
ftpfs_directory_timeout=900
ftpfs_retry_seconds=30
fish_directory_timeout=900
editor_tab_spacing=8
editor_word_wrap_line_length=72
editor_option_save_mode=0
editor_backup_extension=~
editor_filesize_threshold=64M
editor_stop_format_chars=-+*\\,.;:&>
mcview_eof=
skin=dark
shadows=true
[Layout]
message_visible=false
keybar_visible=true
xterm_title=true
output_lines=0
command_prompt=false
menubar_visible=true
free_space=true
horizontal_split=false
vertical_equal=true
left_panel_size=86
horizontal_equal=true
top_panel_size=1
[Misc]
timeformat_recent=%b %e %H:%M
timeformat_old=%b %e %Y
ftp_proxy_host=gate
ftpfs_password=anonymous@
display_codepage=UTF-8
source_codepage=Other_8_bit
autodetect_codeset=
spell_language=en
clipboard_store=
clipboard_paste=
[Colors]
base_color=
xterm-256color=
color_terminals=
xterm=
[Panels]
show_mini_info=true
kilobyte_si=false
mix_all_files=false
show_backups=true
show_dot_files=true
fast_reload=false
fast_reload_msg_shown=false
mark_moves_down=true
reverse_files_only=true
auto_save_setup_panels=false
navigate_with_arrows=false
panel_scroll_pages=true
panel_scroll_center=false
mouse_move_pages=true
filetype_mode=true
permission_mode=false
torben_fj_mode=false
quick_search_mode=2
select_flags=6
[Panelize]
Find *.orig after patching=find . -name \\*.orig -print
Find SUID and SGID programs=find . \\( \\( -perm -04000 -a -perm /011 \\) -o \\( -perm -02000 -a -perm /01 \\) \\) -print
Find rejects after patching=find . -name \\*.rej -print
Modified git files=git ls-files --modified
[terminal:general]
complete=`

@ -0,0 +1,6 @@
[main:empty-cmdline]
ChangePanel = tab
[main]
ChangePanel =
[input]
Complete = tab; alt-tab

@ -0,0 +1,9 @@
# Video panning.
Alt+left add video-pan-x 0.1
Alt+right add video-pan-x -0.1
Alt+up add video-pan-y 0.1
Alt+down add video-pan-y -0.1
# Video zooming.
Alt+= add video-zoom 0.1
Alt+- add video-zoom -0.1

@ -0,0 +1,10 @@
loop-playlist=inf
loop-file=inf
vo=gpu
hwdec=vaapi
volume=100
image-display-duration=inf
no-border
no-osc
osd-level=0
alpha=yes

@ -0,0 +1,447 @@
# Neofetch Configuration File.
# Copyright 2021 Inference
# 1.0.0
print_info() {
info title
info underline
info "Host" model
info "CPU" cpu
info "GPU" gpu
info "GPU drv" gpu_driver
info "Mem" memory
info "Res" resolution
info underline
info "OS" distro
info "Kernel" kernel
info "Packages" packages
info "Shell" shell
info "DE" de
info "WM" wm
info "Terminal" term
info "Locale" locale
}
# Kernel
# Shorten the output of the kernel function.
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --kernel_shorthand
# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
#
# Example:
# on: '4.8.9-1-ARCH'
# off: 'Linux 4.8.9-1-ARCH'
kernel_shorthand="off"
# Distro
# Shorten the output of the distro function
#
# Default: 'off'
# Values: 'on', 'off', 'tiny'
# Flag: --distro_shorthand
# Supports: Everything except Windows and Haiku
distro_shorthand="off"
# Show/Hide OS Architecture.
# Show 'x86_64', 'x86' and etc in 'Distro:' output.
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --os_arch
#
# Example:
# on: 'Arch Linux x86_64'
# off: 'Arch Linux'
os_arch="on"
# Packages
# Show/Hide Package Manager names.
#
# Default: 'tiny'
# Values: 'on', 'tiny' 'off'
# Flag: --package_managers
#
# Example:
# on: '998 (pacman), 8 (flatpak), 4 (snap)'
# tiny: '908 (pacman, flatpak, snap)'
# off: '908'
package_managers="on"
# Shell
# Show the path to $SHELL
#
# Default: 'off'
# Values: 'on', 'off'
# Flag: --shell_path
#
# Example:
# on: '/bin/bash'
# off: 'bash'
shell_path="off"
# Show $SHELL version
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --shell_version
#
# Example:
# on: 'bash 4.4.5'
# off: 'bash'
shell_version="on"
# CPU
# CPU speed type
#
# Default: 'bios_limit'
# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
# Flag: --speed_type
# Supports: Linux with 'cpufreq'
# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
speed_type="bios_limit"
speed_shorthand="off"
cpu_brand="on"
cpu_speed="on"
# CPU Cores
# Display CPU cores in output
#
# Default: 'logical'
# Values: 'logical', 'physical', 'off'
# Flag: --cpu_cores
# Support: 'physical' doesn't work on BSD.
#
# Example:
# logical: 'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
# off: 'Intel i7-6500U @ 3.1GHz'
cpu_cores="logical"
gpu_brand="on"
gpu_type="all"
refresh_rate="on"
# Gtk Theme / Icons / Font
# Shorten output of GTK Theme / Icons / Font
#
# Default: 'off'
# Values: 'on', 'off'
# Flag: --gtk_shorthand
#
# Example:
# on: 'Numix, Adwaita'
# off: 'Numix [GTK2], Adwaita [GTK3]'
gtk_shorthand="off"
# Enable/Disable gtk2 Theme / Icons / Font
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --gtk2
#
# Example:
# on: 'Numix [GTK2], Adwaita [GTK3]'
# off: 'Adwaita [GTK3]'
gtk2="on"
# Enable/Disable gtk3 Theme / Icons / Font
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --gtk3
#
# Example:
# on: 'Numix [GTK2], Adwaita [GTK3]'
# off: 'Numix [GTK2]'
gtk3="on"
# Disk
# Which disks to display.
# The values can be any /dev/sdXX, mount point or directory.
# NOTE: By default we only show the disk info for '/'.
#
# Default: '/'
# Values: '/', '/dev/sdXX', '/path/to/drive'.
# Flag: --disk_show
#
# Example:
# disk_show=('/' '/dev/sdb1'):
# 'Disk (/): 74G / 118G (66%)'
# 'Disk (/mnt/Videos): 823G / 893G (93%)'
#
# disk_show=('/'):
# 'Disk (/): 74G / 118G (66%)'
#
disk_show=('/')
# Disk subtitle.
# What to append to the Disk subtitle.
#
# Default: 'mount'
# Values: 'mount', 'name', 'dir'
# Flag: --disk_subtitle
#
# Example:
# name: 'Disk (/dev/sda1): 74G / 118G (66%)'
# 'Disk (/dev/sdb2): 74G / 118G (66%)'
#
# mount: 'Disk (/): 74G / 118G (66%)'
# 'Disk (/mnt/Local Disk): 74G / 118G (66%)'
# 'Disk (/mnt/Videos): 74G / 118G (66%)'
#
# dir: 'Disk (/): 74G / 118G (66%)'
# 'Disk (Local Disk): 74G / 118G (66%)'
# 'Disk (Videos): 74G / 118G (66%)'
disk_subtitle="mount"
# Text Colors
# Text Colors
#
# Default: 'distro'
# Values: 'distro', 'num' 'num' 'num' 'num' 'num' 'num'
# Flag: --colors
#
# Each number represents a different part of the text in
# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
#
# Example:
# colors=(distro) - Text is colored based on Distro colors.
# colors=(4 6 1 8 8 6) - Text is colored in the order above.
colors=(distro)
# Text Options
# Toggle bold text
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --bold
bold="on"
# Enable/Disable Underline
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --underline
underline_enabled="on"
# Underline character
#
# Default: '-'
# Values: 'string'
# Flag: --underline_char
underline_char="-"
# Info Separator
# Replace the default separator with the specified string.
#
# Default: ':'
# Flag: --separator
#
# Example:
# separator="->": 'Shell-> bash'
# separator=" =": 'WM = dwm'
separator=":"
# Progress Bars
# Bar characters
#
# Default: '-', '='
# Values: 'string', 'string'
# Flag: --bar_char
#
# Example:
# neofetch --bar_char 'elapsed' 'total'
# neofetch --bar_char '-' '='
bar_char_elapsed="-"
bar_char_total="="
# Toggle Bar border
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --bar_border
bar_border="on"
# Progress bar length in spaces
# Number of chars long to make the progress bars.
#
# Default: '15'
# Values: 'num'
# Flag: --bar_length
bar_length=15
# Progress bar colors
# When set to distro, uses your distro's logo colors.
#
# Default: 'distro', 'distro'
# Values: 'distro', 'num'
# Flag: --bar_colors
#
# Example:
# neofetch --bar_colors 3 4
# neofetch --bar_colors distro 5
bar_color_elapsed="distro"
bar_color_total="distro"
# Info display
# Display a bar with the info.
#
# Default: 'off'
# Values: 'bar', 'infobar', 'barinfo', 'off'
# Flags: --cpu_display
# --memory_display
# --battery_display
# --disk_display
#
# Example:
# bar: '[---=======]'
# infobar: 'info [---=======]'
# barinfo: '[---=======] info'
# off: 'info'
cpu_display="off"
memory_display="off"
battery_display="off"
disk_display="off"
# Backend Settings
# Image backend.
#
# Default: 'ascii'
# Values: 'ascii', 'caca', 'chafa', 'jp2a', 'iterm2', 'off',
# 'termpix', 'pixterm', 'tycat', 'w3m', 'kitty'
# Flag: --backend
image_backend="ascii"
# Image Source
#
# Which image or ascii file to display.
#
# Default: 'auto'
# Values: 'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
# 'command output (neofetch --ascii "$(fortune | cowsay -W 30)")'
# Flag: --source
#
# NOTE: 'auto' will pick the best image source for whatever image backend is used.
# In ascii mode, distro ascii art will be used and in an image mode, your
# wallpaper will be used.
image_source="auto"
# Ascii Options
# Ascii distro
# Which distro's ascii art to display.
#
# Default: 'auto'
# Values: 'auto', 'distro_name'
# Flag: --ascii_distro
#
# NOTE: Arch and Ubuntu have 'old' logo variants.
# Change this to 'arch_old' or 'ubuntu_old' to use the old logos.
# NOTE: Ubuntu has flavor variants.
# Change this to 'Lubuntu', 'Xubuntu', 'Ubuntu-GNOME' or 'Ubuntu-Budgie' to use the flavors.
# NOTE: Arch, Crux and Gentoo have a smaller logo variant.
# Change this to 'arch_small', 'crux_small' or 'gentoo_small' to use the small logos.
ascii_distro="auto"
# Ascii Colors
#
# Default: 'distro'
# Values: 'distro', 'num' 'num' 'num' 'num' 'num' 'num'
# Flag: --ascii_colors
#
# Example:
# ascii_colors=(distro) - Ascii is colored based on Distro colors.
# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
ascii_colors=(distro)
# Bold ascii logo
# Whether or not to bold the ascii logo.
#
# Default: 'on'
# Values: 'on', 'off'
# Flag: --ascii_bold
ascii_bold="on"
# Image Options
# Image loop
# Setting this to on will make neofetch redraw the image constantly until
# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
#
# Default: 'off'
# Values: 'on', 'off'
# Flag: --loop
image_loop="off"
# Thumbnail directory
#
# Default: '~/.cache/thumbnails/neofetch'
# Values: 'dir'
thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
# Crop mode
#
# Default: 'normal'
# Values: 'normal', 'fit', 'fill'
# Flag: --crop_mode
#
# See this wiki page to learn about the fit and fill options.
# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
crop_mode="normal"
# Crop offset
# Note: Only affects 'normal' crop mode.
#
# Default: 'center'
# Values: 'northwest', 'north', 'northeast', 'west', 'center'
# 'east', 'southwest', 'south', 'southeast'
# Flag: --crop_offset
crop_offset="center"
# Gap between image and text
#
# Default: '3'
# Values: 'num', '-num'
# Flag: --gap
gap=3

@ -0,0 +1,3 @@
set number
set tabstop=4

@ -0,0 +1,212 @@
# Sway Configuration File.
# Copyright 2022 Inference
# Set Mod key.
set $mod Mod4
# Reload Sway configuration file.
bindsym $mod+Shift+c reload
# Restart Sway.
bindsym $mod+Shift+r restart
# Exit Sway (log out of Wayland session).
bindsym $mod+Shift+e exec swaynag -t warning -m 'Exit Sway?' -b 'Yes' 'swaymsg exit'
# Start terminal.
bindsym $mod+Return exec alacritty
# Kill focused window.
bindsym $mod+Shift+q kill
# Change focus.
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# Move focused window.
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# Split in horizontal orientation.
bindsym $mod+h split h
# Split in vertical orientation.
bindsym $mod+v split v
# Enter fullscreen mode for the focused container.
bindsym $mod+f fullscreen toggle
# Change container layout.
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# Change focus between tiling/floating windows.
bindsym $mod+space focus mode_toggle
# Pop-up windows control.
popup_during_fullscreen smart
# Focus the parent container.
bindsym $mod+a focus parent
# Window activation focus control.
focus_on_window_activation smart
# Workspaces.
set $ws1 "0"
set $ws2 "1"
set $ws3 "2"
set $ws4 "3"
set $ws5 "4"
# Switch workspace.
bindsym $mod+1 workspace $ws1
bindsym $mod+2 workspace $ws2
bindsym $mod+3 workspace $ws3
bindsym $mod+4 workspace $ws4
bindsym $mod+5 workspace $ws5
# Move focused container to workspace.
bindsym $mod+Shift+1 move container to workspace $ws1
bindsym $mod+Shift+2 move container to workspace $ws2
bindsym $mod+Shift+3 move container to workspace $ws3
bindsym $mod+Shift+4 move container to workspace $ws4
bindsym $mod+Shift+5 move container to workspace $ws5
# Move window.
## Move window via shortcut.
bindsym $mod+m focus floating; mode "move"
mode "move" {
# Move mode shortcuts.
bindsym J move up 20px
bindsym K move down 20x
bindsym N move left 20px
bindsym M move right 20px
## Return to normal mode.
bindsym $mod+m mode "default"
}
# Resize window.
## Resize window via shortcut.
bindsym $mod+r mode "resize"
mode "resize" {
## Resize mode shortcuts.
bindsym N resize shrink width 10 px or 10 ppt
bindsym K resize grow height 10 px or 10 ppt
bindsym J resize shrink height 10 px or 10 ppt
bindsym M resize grow width 10 px or 10 ppt
## Return to normal mode.
bindsym $mod+r mode "default"
}
# Volume control.
## Activate volume up key.
bindsym XF86AudioRaiseVolume exec amixer -q -D pulse sset Master 5%+
## Activate volume down key.
bindsym XF86AudioLowerVolume exec amixer -q -D pulse sset Master 5%-
## Activate volume mute key.
bindsym XF86AudioMute exec amixer -q -D pulse sset Master toggle
# Display brightness control.
## Activate display brightness up key.
bindsym XF86MonBrightnessUp exec "brightnessctl s 5%+"
## Activate display brightness down key.
bindsym XF86MonBrightnessDown exec "brightnessctl s 5%-"
# Keyboard layout.
input * {
xkb_layout gb,jp
xkb_options grp:alt_space_toggle
}
# Disable mouse focus.
focus_follows_mouse no
# Disable mouse buttons.
## Left mouse button.
bindsym button1 nop
## Middle mouse button.
bindsym button2 nop
## Right mouse button.
bindsym button3 nop
## Scroll wheel up.
bindsym button4 nop
## Scroll wheel down.
bindsym button5 nop
## Scroll wheel right.
bindsym button6 nop
## Scroll wheel left.
bindsym button7 nop
# Media control.
## Play media key.
bindsym XF86AudioPlay exec playerctl play
## Pause media key.
#bindsym XF86AudioPause exec playerctl pause
## Previous media key.
bindsym XF86AudioPrev exec playerctl previous
## Next media key.
bindsym XF86AudioNext exec playerctl next
# System power control.
## Shut down system.
#bindsym XF86PowerOff exec alacritty -e "shutdown -h 0"
# Font for window titles.
font pango:monospace 9
# Colors.
## Class Border Backgr Text Indicator Child_border
client.focused #4c7899 #285577 #ffffff #2e9ef4 #285577
client.focused_inactive #333333 #5f676a #ffffff #484e50 #5f676a
client.unfocused #333333 #222222 #888888 #292d2e #222222
client.urgent #2f343a #c79500 #000000 #900000 #900000
client.placeholder #000000 #0c0c0c #ffffff #000000 #0c0c0c
client.background #ffffff
# Open specific software on specific workspaces.
#assign [class="KeePassXC"] $ws2
#assign [class="Signal"] $ws3
#assign [class="Wire"] $ws3
#assign [class="Element"] $ws3
#assign [class="Session"] $ws3
#assign [class="VSCodium"] $ws4
#assign [class="FreeTube"] $ws5
# External software.
## Execute Waybar.
exec waybar
## Execute Dunst.
exec dunst
## Execute Pipewire.
exec gentoo-pipewire-launcher
## Execute PulseAudio.
exec pulseaudio -D
## Execute Unclutter.
#exec_always --no-startup-id nohup unclutter -idle 2 &
## Set desktop background.
#exec_always --no-startup-id /scr/background-set.sh
## Execute Wofi.
bindsym $mod+d exec "wofi --show drun"
# Screen locker.
bindsym $mod+l exec alacritty -e swaylock -c 000000
exec swayidle -w \
timeout 600 'swaylock -f -c 000000' \
timeout 1200 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' \
before-sleep 'swaylock -f -c 000000'

@ -0,0 +1,28 @@
#!/usr/bin/env bash
# Copyright 2021 Inference
# 1.0.0.1
#prepend_zero () {
# seq -f "%02g" $1 $1
#}
#artist=$(echo -n $(cmus-remote -C status | grep "tag artist" | cut -c 12-))
#if [[ $artist = *[!\ ]* ]]; then
# song=$(echo -n $(cmus-remote -C status | grep title | cut -c 11-))
# position=$(cmus-remote -C status | grep position | cut -c 10-)
# minutes1=$(prepend_zero $(($position / 60)))
# seconds1=$(prepend_zero $(($position % 60)))
# duration=$(cmus-remote -C status | grep duration | cut -c 10-)
# minutes2=$(prepend_zero $(($duration / 60)))
# seconds2=$(prepend_zero $(($duration % 60)))
# echo -n "$artist - $song [$minutes1:$seconds1/$minutes2:$seconds2]"
#else
# echo
#fi
cmus-remote -C 'format_print %F'

@ -0,0 +1,153 @@
// Waybar - Configuration.
{
"layer": "top",
"position": "top",
"height": 30,
"modules-left": [
"clock#date",
"clock#time",
],
"modules-center": [
"sway/workspaces",
"sway/mode",
],
"modules-right": [
"pulseaudio",
"backlight",
"sway/language",
"cpu",
"temperature",
"memory",
"disk",
"network",
"battery",
],
"clock#date": {
"interval": 1,
"format": "{:%Y-%m-%d}",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"clock#time": {
"interval": 1,
"format": "{:%H:%M:%S}",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
// "battery": {
// "interval": 1,
// "format": " {capacity}%",
// "format-discharging": " {capacity}%",
// "disable-hover": true,
// "disable-click": true,
// "disable-scroll": true,
// "tooltip": false,
// },
"cpu": {
"interval": 1,
"format": " {usage:3}% {avg_frequency:0.03} GHz",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"sway/language": {
"format": " {short}",
"min-length": 4,
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"memory": {
"interval": 1,
"format": " {used:0.02f} GiB / {total:0.02f} GiB",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"disk": {
"interval": 1,
"format": " {used} / {total}",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"network": {
"interval": 1,
"format-wifi": " {essid} ({signalStrength}%)", // Icon: wifi
//"format-ethernet": " {ifname}: {ipaddr}/{cidr}", // Icon: ethernet
"format-ethernet": " {ifname}",
"format-disconnected": "",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"sway/workspaces": {
"format": "{name}",
"all-outputs": false,
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"sway/mode": {
"format": " {}" ,
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"pulseaudio": {
"format": " {volume:3}%",
"format-muted": " {volume:3}%",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"backlight": {
"device": "amdgpu_bl0",
"format": " {percent:3}%",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
"temperature": {
"interval": 1,
"thermal-zone": 0,
"hwmon-path": "/sys/class/hwmon/hwmon1/temp1_input",
"critical-threshold": 90,
"format": "{temperatureC:3}°C",
"disable-hover": true,
"disable-click": true,
"disable-scroll": true,
"tooltip": false,
},
}

@ -0,0 +1,295 @@
; root filesystem module configuration.
[module/filesystem0]
type = internal/fs
interval = 1
mount-0 = /
label-mounted = " /: %used%/%total% "
label-mounted-background = #c79500
label-mounted-foreground = #000000
label-unmounted = "  /:  "
label-unmounted-background = #c79500
label-unmounted-foreground = #000000
; home filesystem module configuration.
[module/filesystem1]
type = internal/fs
interval = 1
mount-0 = /home
label-mounted = "  /home: %used%/%total% "
label-mounted-background = #c79500
label-mounted-foreground = #000000
label-unmounted = "  /home:  "
label-unmounted-background = #c79500
label-unmounted-foreground = #000000
; CPU module configuration.
[module/cpu]
type = internal/cpu
interval = 1
label = "  %percentage:3%% "
label-background = #003487
label-foreground = #ffffff
; Physical memory module configuration.
[module/memory0]
type = internal/memory
interval = 1
label = "  %gb_used%/%gb_total% "
label-background = #a60000
label-foreground = #ffffff
; Virtual memory module configuration.
[module/memory1]
type = internal/memory
interval = 1
label = "  %gb_swap_used%/%gb_swap_total% "
label-background = #a60000
label-foreground = #ffffff
; Ethernet module configuration.
[module/eth]
type = internal/network
interface = eth0
interval = 1
label-connected = "   "
label-connected-background = #007a00
label-connected-foreground = #ffffff
format-disconnected = <label-disconnected>
label-disconnected = "   "
label-disconnected-background = #007a00
label-disconnected-foreground = #ffffff
; Wi-Fi module configuration.
[module/wlan]
type = internal/network
interface = wlan0
interval = 1
format-connected = <label-connected>
label-connected = "   "
label-connected-background = #007a00
label-connected-foreground = #ffffff
format-disconnected = <label-disconnected>
label-disconnected = "   "
label-disconnected-background = #007a00
label-disconnected-foreground = #ffffff
; Public IP address module configuration.
[module/ip-public]
type = custom/script
exec = curl -s https://www.icanhazip.com
label-padding = 1
format = <label>
label = %output:15%
label-background = #007a00
label-foreground = #ffffff
; Audio module configuration.
[module/pulseaudio]
type = internal/pulseaudio
format-volume = <label-volume>
label-volume = "  %percentage:3%% "
label-volume-foreground = #bcbcbc
label-muted = "  MUTE "
label-muted-foreground = #bcbcbc
; Battery percent module configuration.
[module/battery-pc]
type = internal/battery
battery = BAT0
adapter = AC
full-at = 95
format-charging = <label-charging>
format-discharging = <label-discharging>
label-full = "  %percentage:3%% "
label-full-background = #000000
label-full-foreground = #bcbcbc
label-charging = "  %percentage:3%% "
label-charging-background = #000000
label-charging-foreground = #ffbf00
label-discharging = "  %percentage:3%% "
label-discharging-background = #000000
label-discharging-foreground = #bcbcbc
ramp-capacity-0 =
ramp-capacity-1 =
ramp-capacity-2 =
ramp-capacity-3 =
ramp-capacity-4 =
ramp-capacity-0-foreground = #c79500
; Battery time remaining module configuration.
[module/battery-tm]
type = internal/battery
battery = BAT0
format-full = <label-full>
format-charging = <label-charging>
format-discharging = <label-discharging>
time-format = %H:%M
label-full = " "
label-full-background = #000000
label-full-foreground = #bcbcbc
label-charging = " %time% "
label-charging-background = #000000
label-charging-foreground = #bcbcbc
label-discharging = " %time% "
label-discharging-background = #000000
label-discharging-foreground = #bcbcbc
; CPU temperature module configuration.
;[module/temperature0]
;type = internal/temperature
;hwmon-path = /sys/devices/pci0000:00/0000:00:18.3/hwmon/hwmon3/temp1_input
;thermal-zone = 0
;warn-temperature = 80
;interval = 1
;format = <label>
;label = " %temperature-c% "
;label-background = #003487
;label-foreground = #ffffff
;format-warn = <label-warn>
;label-warn = "%temperature-c% "
;label-warn-background = #003487
;label-warn-foreground = #a60000
[module/cpu-temp]
type = custom/script
exec = /cfg/polybar/cpu-temp.sh
interval = 1
label-background = #003487
label-foreground = #ffffff
; GPU temperature module configuration.
[module/temperature1]
type = internal/temperature
hwmon-path = /sys/devices/pci0000:00/0000:00:08.1/0000:04:00.0/hwmon/hwmon4/temp1_input
thermal-zone = 0
warn-temperature = 80
interval = 1
format = <label>
label = "  %temperature-c% "
label-background = #6600cc
label-foreground = #ffffff
format-warn = <label-warn>
label-warn = "  %temperature-c% "
label-warn-background = #6600cc
label-warn-foreground = #a60000
; Storage temperature module configuration.
[module/temperature2]
type = internal/temperature
hwmon-path = /sys/devices/virtual/nvme-subsystem/nvme-subsys0/nvme0/hwmon0/temp1_input
thermal-zone = 0
warn-temperature = 80
interval = 1
format = <label>
label = " %temperature-c% "
label-background = #c79500
label-foreground = #000000
format-warn = <label-warn>
label-warn = " %temperature-c% "
; Backlight module configuration.
[module/backlight]
type = internal/backlight
card = amdgpu_bl0
format = <label>
label = "  %percentage:3%% "
label-foreground = #bcbcbc
enable-scroll = false
; cmus module configuration.
[module/cmus]
type = custom/script
exec = cmus-remote -C 'format_print %F'
exec-if = pgrep -x cmus
interval = 1
label-font = 3
format = <label>
format-underline = ${colors.foreground-alt}
label = %output%
label-maxlen = 80
; CPU frequency module configuration.
[module/cpu-frq]
type = custom/script
exec = $HOME/.config/polybar/cpu-frq.sh
interval = 1
label-background = #003487
label-foreground = #ffffff
; Blank module.
[module/blank]
type = custom/script
exec = echo " "
label-background = #000000
label-foreground = #999999
; CPU blank module - large.
[module/cpu-blank-l]
type = custom/script
exec = echo " "
label-background = #003487
label-foreground = #ffffff
; CPU blank module - small.
[module/cpu-blank-s]
type = custom/script
exec = echo " "
label-background = #003487
label-foreground = #ffffff
[settings]
screenchange-reload = true
[global/wm]
margin-top = 5
margin-bottom = 5
[bar/polybar0]
width = 100%
height = 25
radius = 0.0
fixed-center = false
background = #000000
foreground = #bcbcbc
line-size = 0
line-color = #f00
border-size = 0
border-color = #000000
padding-left = 0
padding-right = 0
module-margin-left = 0
module-margin-right = 0
font-0 = monospace:pixelsize=12;1
font-1 = "Font Awesome 5 Free:style=Regular:pixelsize=11;2"
font-2 = "Font Awesome 5 Free:style=Solid:pixelsize=11;2"
font-3 = "Font Awesome 5 Brands:style=Regular:pixelsize=11;2"
modules-left = date
modules-center = i3
modules-right = pulseaudio backlight xkeyboard cpu memory0 memory1 filesystem1 eth wlan battery-pc
wm-restack = i3
override-redirect = false
[bar/polybar1]
width = 100%
height = 22
radius = 0.0
fixed-center = false
background = #000000
foreground = #bcbcbc
line-size = 0
line-color = #f00
border-size = 0
border-color = #000000
padding-left = 0
padding-right = 0
module-margin-left = 0
module-margin-right = 0
font-0 = monospace:pixelsize=12;1
font-1 = "Font Awesome 5 Free:style=Regular:pixelsize=11;2"
font-2 = "Font Awesome 5 Free:style=Solid:pixelsize=11;2"
font-3 = "Font Awesome 5 Brands:style=Regular:pixelsize=11;2"
modules-left = cmus
modules-center =
modules-right = cpu-blank-s cpu-blank-s cpu-blank-l cpu-frq cpu-blank-l cpu-temp cpu-blank-s cpu-blank-s cpu-blank-s cpu-blank-s cpu-blank-l cpu-blank-l cpu-blank-l cpu-blank-l cpu-blank-l cpu-blank-l filesystem0 temperature2 ip-public battery-tm
wm-restack = i3
override-redirect = false

@ -0,0 +1,15 @@
#!/usr/bin/env sh
# Copyright 2021 Inference
# 1.0.0.1
c=0;t=0
awk '/MHz/ {print $4}' < /proc/cpuinfo | (while read -r i
do
t=$( echo "$t + $i" | bc )
c=$((c+1))
done
echo "scale=2; $t / $c / 1000" | bc | awk '{print $1" GHz "}')

@ -0,0 +1,8 @@
#!/usr/bin/env bash
# Copyright 2021 Inference
# 1.0.0.1
sensors | grep "Tctl" | tr -d '+' | awk '{print $2}'

@ -0,0 +1,19 @@
#!/usr/bin/env sh